Springfield Armory XDS Detail Disassembly Pt. 6 of 6

by James Nicholas



Springfield Armory XDS Trigger & Sear Housing Disassembly 

By James Nicholas

This is part 6 of a 6 part article series focusing on the complete 100% detail disassembly of the Springfield Armory XDS pistol. If you can not easily find the other sections use our search icon on the top right of the website. Type in "XDS Detail Disassembly" and we will provide you with the complete series. 

We have broken the six part series into the following sections to make it easier to follow and focus on the following areas. 

Sections:

  • 1. Magazines
  • 2. Field Strip 
  • 3. Slide Disassembly
  • 4. Striker Disassembly
  • 5. Frame Disassembly
  • 6. Sear Housing and Trigger Disassembly

Note:

  • Springfield Armory does not recommend further disassembly of the frame. "Further dismantling is not necessary and should only be done by Springfield, Inc. or a qualified pistolsmith". Pg 26 XDS operation and safety manual.  
  • These instructions are for informational use only and should only be attempted by trained individuals. If you are unsure and/or do not have the right tools and training please do not attempt. 

The following step are for the complete 100% disassembly of the Springfield Armory XDS pistol. The disassembly procedure will be spit into 6 parts focusing on the different assemblies and areas of the pistol. 

We will first remove the trigger assembly from the sear housing. To do this pull the trigger bar forward and then out of the housing as shown above center. The crucifix are of the trigger bar rest inside of the slot of the sear. 

With the trigger bar removed the sear is now limp and the sear spring attached to the sear is no longer pulling on the grip safety pin. The grip safety pin can easily be pushed out of the sear housing in either direction top center. 

*

*

*

*

The Sear Housing Assembly Parts. 

*

*

The Trigger Bar is now removed from the Trigger.

*

*